A Blend of 35% Synthetic Limonene Solvent and 3
Synergistic emulsifiers, in a Micro-Emulsion to make the product
soluble in water. The entire formula is highly water-reactive, and
it's total cleaning power is directed toward the soil load and it's
indefinite time suspension, for superior soil removal in the
extraction cleaning process.
Impressive results are attained with ANY method
of cleaning: TM Extraction, Portable Extraction, Bonnet Cleaning,
Dry Foam Cleaning, Dry Powder Systems, Rotary, Combined Method
Systems, etc.
Superior cleaning action on all grease, oil, tar,
or other grease based soiling including restaurant grease.
Low pH of 6.6 makes the use of Pow-R-Pak
completely safe for all fabrics. Free Rinsing, Non Residual. Natural
color brightening effect because of the blend of chemicals and the
low pH level. You will produce phenomenal color recovery results on
orientals, braided, and multi-colored furniture fabrics.
Super Concentration gives you a low usage cost of
63 cents per gallon at a 3 Oz. per gallon dilution rate. We suggest
that you begin with these recommended ratios, and then adjust for
your own particular circumstances.
| 3 Oz. per gallon of water |
|
Pump Up Sprayer |
| 20 Oz. + 1 gallon of water |
|
HydroForce™ with yellow tip |
For carpeting only. To Super Power your solution,
add 1-2 Oz. of Power Powder to your 3 Oz. per gallon solution with a
pump-up sprayer applicator. Add 2-4 Oz. of Power Powder to your
HydroForce solution. When mixed together in this manner, these 2
products form an extremely live, synergistic cleaning action which
is very active on any type of soil load.
Pow-R-Pak may be used as a potent spotter when
you mix it 2 Oz. per quart for use in a trigger sprayer. This
dilution rate will work extremely well when sold, or given to
customers as a customer use item. If you are using Fabric Protection
Guarantees, this dilution ratio with Pow-R-Pak will create a great
all-purpose spotter for your guaranteed customers to use as an
initial reaction to a spot or spill problem.
There is a tendency to want to use higher
dilutions of this product for very soiled areas. We advise against
using higher dilutions as it tends to "clog up" the system
of soil suspension, and removal. It is better for you to double
spray these areas with the 3 Oz. per gallon dilution, than it is to
raise the dilution ratio. Adding some sort of mechanical action to
your cleaning effort will also help in removal of heavily impacted
soil load situations. A brush type action is best as it grooves the
soil load for better penetration of the chemical.
